IBM x3250 M3 IMM NIC
Hi all,This question is for those IBM-savvy users out there. I've recently discovered that there are 2 of our IBM x3250 M3 units that do not have IMM management enabled. Unlike the larger models there...
View ArticleServer error post bios CP:B7
Hello everyone,We have an IBM X3400 server. It displays a message in the top right hand of the screen after BIOS which just says CP:B7. The status light is orange and then the system halts.I am not...
View ArticleIBM i CL - can I run it like a batch file?
I want to put a bunch of commands that I need to do an audit on a AS/400 - is there anyway to layer these commands like dspsysval.... and anzdftpwd .... to get all the results on an outfile for review...
View ArticleBest SATA controller for SSD disks in IBM x3650 M1 (original)?
We have two IBMx3650 M1 (original) servers with 2 Xeon processors (2.66GHz) each, a ServeRaid8i controller and 2x147GB SAS disks configured in RAID0.Our tech people have been complaining for the slow...
View ArticleBest RAID controller for SSD disks in IBM x3650 M1 (original)?
We have two IBMx3650 M1 (original) servers with 2 Xeon processors (2.66GHz) each, a ServeRaid8i controller and 2x147GB SAS disks configured in RAID0.Our tech people have been complaining for the slow...
View ArticleIs IBM ServeRAID M5210 compatible with x3650 original (M1)?
I would like to upgrade our RAID controller (ServeRAID-8k) in our x3650 M1 and also include 2 SSDs of 500GB each, in order to improve the performance of the server, which is supporting I/O-intensive DB...
View ArticleAs400 how to add another library to the job description in a group profile?
As400 how to add another library to the job description in a group profile?Thank you in advance
View ArticleAS400 Setup Help Required
I am very new to AS400 and I am very keen in learning CL programming ,db2 ETC. I have installed IBM Iseries 5.9 on my personal laptop with system i navigator etc. I don't want to connect it remote . I...
View ArticleClik here to view.
Citrix - AS400 emulator disconnected
Hi Everyone,We have published a AS400 Emulator from XenApp 6.5. Our user's encounter intermittent disconnected error when logging in to emulator. Our workaround is to log them off from XenApp console...
View ArticleSwapping SAS drives for a Larger capacity - IBM Storwize V3700
Has anyone ever ran into an issue of space and needed to swap smaller capacity drives for bigger ones? Without breaking the RAID and rebuilding.If so how would one go about do this?Swap command on the...
View ArticleHow can I determine the libraries used in Job Descriptions?
Hello, I'm in the process of implementing mirroring my iSeries to a remote site for disaster recovery. For the first time in many years, we're doing a good cleanup of old libraries that are not used...
View ArticleConvert IBM iSeries Server from RAID 5 to RAID 10
Hey there,So I have been looking around and I have found lots about the Drive Protection options on an IBM iSeries/AS400/System i/Power Servers and Noticed we currently have RAID 5 protection on our...
View ArticleClient Access for AS/400 system: e
Is there any Client Access that is supported for Server 2008? We have a very old Client Access that was designed for Windows 95/98 that works fine up to XP/Server 2003. I see in the IBM website they...
View ArticleClik here to view.
LSI_SAS raid controller error and warnings, MegaRAID storage mgr says it's ok
My IBM x3400 M3, Server 2008 R2, wasn't allowing access this morning. We could ping it but not access any shares or log into it, and couldn't get it to respond to a shutdown command.So after a hard...
View ArticleRaid Array Degraded, cant boot to Windows
Hi everyone,Today, i get an error when i turn on server ibm x3550 (running Windows Server 2003 Enterprise SP2 x64), the logo Windows Server 2003 loading, after 3s it stop and restart.My server running...
View ArticleIBM iSeries with Lotus/Domino - Turning Off
So, the iSeries isn't a point of focus for me, but I need to turn off Lotus Notes Domino and Sametime. It currently sits on our iSeries. I need to turn it off as well as keep it from starting with the...
View ArticleFastFax (Quadrant Software) SMTP Relay to Office 365
Anyone done this with FastFax? They want to sell me their QuadraConnector for $3000 to SMTP to O365. I guess their default SMTP service only works on port 25.FastFax is tied into our iSeries, which...
View ArticleAS/400 Client access on Windows 10 - will it run ODBC - Green Screen?
Hello,I have a 810 AS400 loaded with V5R3 we use it with Windows 7 now no issues with Client Access v6.1. We want to upgrade to Windows 10. I understand IBM is dropping support that's fine. So, is...
View ArticleUnsupported Transcievers IBM RackSwitch
Does anyone know if you are able to enable unsupported transceivers on an G8000?
View Articlesas/sata controller 43w4297 raid manager software.
Hi.On IBM x3650 ( Typer - 7979I2S; old server ) there was a problem for onboard raid controller card ( 8k-l ). Anytime drive defunct error; hdd installed new one.So i have decided to buy a add on...
View Article